BDZDM - CUT-MAX TAPPING OIL
- MSDS: BDZDM
- Manufacturer: E F HOUGHTON AND CO
- Product Name: CUT-MAX TAPPING OIL
- National Stock Number: 9150-00-450-6938
Product Identification
Product ID:CUT-MAX TAPPING OIL
MSDS Date:07/18/1986
FSC:9150
NIIN:00-450-6938
MSDS Number: BDZDM
Responsible Party
VALLEY FORGE, PA 19482
US
Emergency Phone: 215-666-4105
Info Phone: 215-666-4105
Preparer: DAVID H.EADLINE.
Cage: 73227
Contractor
Telephone: 610-666-4105
Cage: 73277
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 20.0%
OSHA PEL 350 PPM
ACGIH TLV: 350 PPM/450STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
DISTILLATES,HYDROTREATED HEAVY NAPHTENIC
CAS: 64742-52-5
RTECS: PY8035000
Fraction By Weight: SEE #04%
ACGIH TLV: 5MG/CUM(OIL MIST)
DISTILLATES,HYDROTREATED LIGHT NAPHTENIC
CAS: 64742-53-6
RTECS: PY8036000
Fraction By Weight: SEE #04%
ACGIH TLV: 5MG/CUM (OIL MIST)
MFR STATES
CAS: 64741-96-4
RTECS: PY8040000
Fraction By Weight: 10-30%
ACGIH TLV: 5MG/CUM (OIL MIST)
CHLORINATED OLEFIN (TYPE NOT SPECIFIED)
CAS: 68410-99-1
Fraction By Weight: 1-10%
ACGIH TLV: 35MG/CUM-CHLOROPRENE
SULFURIZED TRIGLYCERIDES (TYPE NOT SPECIFIED)
CAS: 61790-49-6
Fraction By Weight: 1-10%
PINE OIL
CAS: 8002-09-3
RTECS: TK5100000
Fraction By Weight: <1%
ODORANT (TERPINEOL OR 3-CYCLOHEXENE-1-METHANOL)
CAS: 98-55-5
RTECS: WZ6700000
Fraction By Weight: <1%
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: 1-10%
OSHA PEL 5000 PPM
ACGIH TLV: 5000PPM/30000STEL;93
Fire Fighting
Flash Point Method:COC
Flash Point:260F/127C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:PRESENT, MAY YIELD TOXIC HCL FUMES ON
COMBUSTION.
Accidental Release
Spill Release Procedures:KEEP AWAY FROM HEAT, SPARKS, FLAME.PROVIDE
VENTILATION. REMOVE CANNISTER TO SAFE AREA & VENT COMPLETELY.
Handling
Handling and Storage Precautions:STORE CANNISTERS IN COOL AREA, NOT EXC
120F. USE PRODUCT W/ADEQUATE POSITIVE VENTILATION.
Other Precautions:AVOID SKIN & EYE EXPOSURE
Exposure Controls
Respiratory Protection:ONLY IF TLV'S ARE EXCEEDED.
Ventilation:USE ADEQUATE POSITIVE VENTILATION IN WORK AREA.
Protective Gloves:RUBBER, PLASTIC
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:NOT REQ'D
Supplemental Safety and Health
MSDS DATED 18JUL86.
Chemical Properties
HCC:V2
Spec Gravity:1.21
Solubility in Water:NEG
Appearance and Odor:CLR, DARK LIQUID; CHLORINATED SOLVENT ODOR
Percent Volatiles by Volume:>60.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID STORAGE TEMP ABOVE 120F
Hazardous Decomposition Products:CO*2, SO*2, HCL
Disposal
Waste Disposal Methods:VENT CANS IN SAFE AREA BEFORE INCINERATION OR
DISCARD. DO NOT PUNCTURE CANS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.